Preparation : Shake well before and while using. Apply at a temperature above 15 °C. Wood must be sanded with 100 or 120 grit sandpaper. Vacuum to dust off. Prior to application on maple wood, wet the wood, let dry 2 hours and lightly sand with a 220 grit sandpaper.
Application : Apply with a paint applicator, cotton rags or a stain pads. After 5 to 15 minutes, wipe off the surface with a cloth to remove any excessive oil.
For an application on furniture and woodwork, it is recommended to use a 000000 steel wool or a 800 grit sandpaper between each layer.
Number of coats :
On Uno treated wood : 2 coats
On untreated wood : 3 coats
On heavy traffic surfaces such as kitchen countertops and work area, it is recommended to apply an additional layer.
Drying time :
- Between coats : 24 hours
- Careful use : 24 hours
- Placing back rugs and furniture : 7 days
- First damp cleaning : 10 days
DANGER OF COMBUSTION - Keep out of reach of children. Materials such as rags used with this product may begin to burn by themselves. After use, put rags in water or lay flat to dry, then discard.