WoodWorker’s Glue AW 2300 is specially designed for the gluing of wood. Made from aliphatic resin, the WoodWorket’s Glue AW 2300 provide a strong and rapid grip with less slippage during clamping.
WoodWorker’s Glue AW 2300 adheres to the pieces by creating a resistant and durable bond on hardwood, softwood, plywood, hardboard and other porous materials. This glue is not recommended for exotic wood. Once cured, WoodWorker’s Glue AW 2300 resist to lacquers, paints, varnishes and to the heat generated by the sanding and cutting.
Preparation : Mix well before using. Adhesive, material and room temperature should be above 20°C. All surfaces to be glued must be clean and dry. Best bonds are obtained when moisture content of wood ranges between 8% and 12%.
Application : Apply directly from the plastic bottle or using a stiff brush or a mechanical glue spreader. Spread glue to result in squeeze out when parts are assembled.
Joints must be tight fitting. Clamp or press using sufficient pressure. Dries light translucent yellow to match most woods. Allow to dry before sanding.
Drying time :
- Assembly time: 15-20 minutes
- Clamp time: 30-60 minutes
- Drying time: 6-8 hours
Approx. 6 sq. m. / L
< 50 g / L
Creamy yellow liquid
Shelf life is 1 year at room temperature in original unopened container. Product is freeze / thaw stable if frozen not lower than -10°C.
Clean hands and tools with warm soapy water before theproduct dries. If glue has hardened, use 50% solution of acetone and water for cleaning. On bonded materials, scrape off and sand dry excess.
Not recommended for exotic wood
When dry, WoodWorker’s Glue is resistant to lacquers, paints and varnishes.
There is currently no review for this product. Be the first to submit one!
Be the first to know about our new products and sales.
Terms of Sales