Preparation : Mix well before using. Adhesive, material and room temperature should be above 20°C. All surfaces to be glued must be clean and dry.
Best bonds are obtained when moisture content of wood ranges between 8% and 12%.
Application : Apply directly from the plastic bottle or using a stiff brush or a mechanical glue spreader. Spread glue to result in squeeze out when parts are assembled.
Joints must be tight fitting. Clamp or press using sufficient pressure.
When glue becomes colorless, a full strength bond has been formed.
Allow to dry before sanding.
Drying time :
- Assembly time: 5-10 minutes
- Clamp time: 20-30 minutes
- Drying time: 4-6 hours
- Spread rate: approx. 6 sq. m. / L