Variable Speed Control Dial

The Variable Speed Control Dial of the Q5 Platinum™ offers you the ability to adjust the out-put pressure to the optimum adjustment needed to perfectly atomize your coating. This is achieved by introducing the correct amount of air to the fluid stream reducing overspray/ bounce-back and dry spray to an absolute minimum.

Noise Reduction Technology

The Q PLATINUM™ Series reduces noise to less than 50% compared to previous levels without causing any unwanted side effects such as overheating or air restriction. In fact, when the Q PLATINUM™ turbine is placed across the room, the low hiss of air passing through the spray gun is more noticeable than the turbine motor itself. Fuji Spray has the quietest spray system on the market!

Heat Dissipation Chamber™

Fuji Spray® has designed a unique method of removing any heat build up from the turbine case. Excess heat is channeled to a Heat Dissipation ChamberTM located at the rear of the case.

Since the hot air is dissipated evenly through an optimum surface area of 60 holes, there is no added hiss or loud whistling noise. There is also no blowing around of debris.

The benefits of a cooler running unit results in a longer life for your turbine motor compared to standard turbines.

Side-Mounted Fan Pattern Control™

This control allows the operator to switch from a circular to oval pattern and anywhere in between.

Unlike traditional HVLP turbine spray guns with the front collar adjustment, the Side-Mounted Fan Pattern Control™ offers full incremental fan size throughout the whole range. Located on the left side of the spray gun for convenience, it is easy to adjust: turn counter-clockwise for a smaller pattern and clockwise for larger.

Compatible with 2 Qt. Pressure Pot

For more material capacity and maneuverability, Fuji Spray's 4 and 5 stage HVLP turbines can be used with a 2 Qt. Pressure Pot.