Évaluations par David MacKinnon
Perfect for strong, stainable repairs
David MacKinnon · 8 Aoû 2020 · Éditer · Supprimer
Oak stair treads and risers were damaged when carpet runner was removed. This product worked great. Was only able to mix and apply about 3 tablespoons of each part in the 20 minutes work time. Putty like constancy was a little hard to apply and had to be worked hard to fill holes and stay in place. Putty holds well on horizontal and verticals surfaces. Once in place and set, it bonded well. Do wish I had also gotten some Liquid Wood to prime some of the bigger patches and for mixing with putty to make it flow a little easier. Patches set hard but sanded easily and took paint and stain well. On stained surfaces, I coloured patches with repair sticks after to match. Clean off or sand any residue oils around patch or those areas will take stain differently than patch and natural wood.
Good product but not right for my application
David MacKinnon · 8 Aoû 2020 · Éditer · Supprimer
Wanted to tint 2-part epoxy to match stripped oak stair treads but tough to do consistently on small batches and there was a large colour range so I resorted to colouring with repair sticks after the stain was applied. Manufacturers of epoxy recommended dry tint and that may have had better results.
