Preparation : In a small amount of neutral base, add the pigments of your choice. If you have a pigment that is difficult to dissolve in water, use a wetting agent (few drops of dishwashing soap), mix well the pigments and once dissolved, add to the total volume. Mix until the color is uniform.
The surface needs to be clean, dry, dust free and free of any dirt. The last sanding can be done using a 150 or 180 grit sandpaper.
Mix well before applying. When applying, the air temperature, the temperature of the product and the surface should not be below 15°C.
Application : Apply generously, make sure to wipe in the direction of the wood grain any excess.
Let dry 2 hours and reapply a second coat if you want a more intense color.
After complete drying, approximately 2 hours, finish using a varnish, wax, oil or any other finishing product.
Application tools : Spray gun, Paintbrush, Cotton rag
Number of coats : 1 to 2 coats
Drying time : 2 hours per coats