Application to bare interior wood: Clean wood and sand to 220 grit. Seal by thinning the first coat or Epifanes Gloss Varnish 50% with thinner. Apply a second coat, thinned 25%. Apply third sealer coat, thinned 15%. For maximum filling apply fourth coat, thinned 0-5%. Apply two coats or Rubbed Effect Varnish, thinned 0-5%. Sand lightly with 320 grit paper between all coats. Allow 24 hours between coats.
Application to previously varnished surfaces: Use denatured alcohol and clean surface thoroughly to remove any oils or waxes. Sand with 320 grit paper and apply one or two coats of Epifanes Rubbed Effect Varnish. Allow 24 hours between coats.
Maintenance: When a degrease in the appearance of the finish is noticed, sand the surface with 320 grit paper and apply one or two coats fresh coats. Always sand with 320 girt paper between coats. Use denatured alcohol to clean the surface and a tack rug to remove fine dust particals. Sitr well prior to use.
