Hardwood Floor Refresher by Bona

New Product

946 ml
In stock
$21.95
Free Delivery
on orders over $90
Quebec, Ontario · More info

Bona Hardwood Floor Refresher is a urethane maintenance coating formulated to restore shine and luster to worn hardwood floors. Hardwood Floor Refresher provides a clear, highly durable gloss to polyurethane finished wood floors that are dull, worn, scratched, or shows signs of wear.
Bona Hardwood Floor Refresher restores the beauty of wood floors, leaves no build-up, and can be recoated.

  • Urethane maintenance coating that's recoatable with finish
  • Specially formulated for use on worn hardwood floors
  • Restores shine
  • Easy application with excellent leveling properties
  • Coverage rate 500 sqft/container

Directions for use

BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEET.

  1. Remove furniture, rugs, etc. Vacuum sweep or dust mop, then thoroughly clean with Bona Hardwood Floor Cleaner and the Microfiber Cleaning Pad on your Bona Mop. Allow the floor to dry.
  2. Gently rock product back and forth to mix. Slightly dampen the Microfiber
    Applicator Pad with water and attach to mop. Squirt product onto the floor and spread. Work in sections small enough to keep the Applicator Pad wet. Smooth with the grain. Continue working in sections until the entire floor is finished. Rinse Applicator Pad with water.
  3. Allow to dry at least 1 hour before walking on the floor. For a glossier look, a second coat may be applied after 2 hours. Allow 24 hours before heavy foot traffic.

For best results: Always test in an inconspicuous section of the floor before use. Coverage should be 500 square feet per bottle. Do not apply the product too thin or streaking will occur. Coat the entire floor to ensure an even appearance.

  1. Clean
  2. Squirt and Spread
  3. Allow to Dry

Specifications

Classification Wood Maintenance
Wood Restoration
Brand Bona
Size 946 ml
Sold Since September 8, 2022
SKU WT760051163
UPC 737025000561
Composition

Water/Aqua, Acrylic Copolymer, Waterborne Urethane Polymer, Tributoxyethyl phosphate, Ethoxydiglycol, Polyethylene Wax, Modified Siloxanes, Benzoisothiazolinone, Methylisothiazolinone

Drying Time

1 hour
Percent Cured after 24 hours : 90%
Max. Cure : 100% after 1 week

Coverage

500 sq. ft. per 32 oz. bottle

VOCs

Does not exceed 2%

Odor

Non-offending

Aspect

Milky white liquid
Clear when dry

Shelf Life

2 years shelf life

Tools cleaning

Clean all tools and equipment with warm water.

Luster

(60º)>80

Tools

Bona Microfiber Applicator Pad

pH

8.0

Solids

10-12%

Recommended Surfaces

All types of unwaxed, residential and commercial polyurethane finished wood floors that are dull, worn, scratched, or show signs of wear. Can be used on most “aluminum oxide” and “ceramic” type UV finishes. Use every 3-4 months depending on traffic.

Complementary Products

Review

There is currently no review for this product. Be the first to submit one!

          

Terms of Sales · Privacy · En français