BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEET.
- Remove furniture, rugs, etc. Vacuum sweep or dust mop, then thoroughly clean with Bona Hardwood Floor Cleaner and the Microfiber Cleaning Pad on your Bona Mop. Allow the floor to dry.
- Gently rock product back and forth to mix. Slightly dampen the Microfiber
Applicator Pad with water and attach to mop. Squirt product onto the floor and spread. Work in sections small enough to keep the Applicator Pad wet. Smooth with the grain. Continue working in sections until the entire floor is finished. Rinse Applicator Pad with water.
- Allow to dry at least 1 hour before walking on the floor. For a glossier look, a second coat may be applied after 2 hours. Allow 24 hours before heavy foot traffic.
For best results: Always test in an inconspicuous section of the floor before use. Coverage should be 500 square feet per bottle. Do not apply the product too thin or streaking will occur. Coat the entire floor to ensure an even appearance.
- Clean
- Squirt and Spread
- Allow to Dry
