Stone, Tile & Laminate Floor Refresher by Bona

5/5 · 1 review
946 ml
In stock
$25.95
Free Delivery
on orders over $90
Quebec, Ontario · More info

Bona Stone, Tile & Laminate Floor Refresher is a professional-level, waterborne acrylic coating that is fortified with urethane; it is formulated to keep sealed, hard-surface floors looking new.

Bona Stone, Tile & Laminate Floor Refresher provides a clear, highly durable gloss to all sealed hard surface flooring including: laminate flooring, vinyl, no-wax linoleum, terrazzo, unglazed tile (ceramic, Mexican Saltillo, quarry), stone, and sealed porous marble.

  • Waterborne acrylic formula with urethane
  • Keeps floors looking new
  • Easy application with excellent leveling properties
  • Coverage rate 500 sq. ft. per container

Directions for use

BEFORE USING, READ ALL DIRECTIONS AND MATERIAL SAFETY DATA SHEET.

  1. Remove furniture, rugs, etc. Vacuum sweep or dust mop, then thoroughly clean with Bona Stone, Tile & Laminate Floor Cleaner and the Microfiber Cleaning Pad on your Bona Mop. Allow the floor to dry.
  2. Gently rock product back and forth to mix. Slightly dampen the
    Microfiber Applicator Pad with water and attach to mop. Squirt Stone, Tile & Laminate Floor Refresher onto the floor and spread. Work in sections small enough to keep the Applicator Pad wet. Continue working in sections until the entire floor is finished. Rinse Applicator Pad with water.
  3. Allow to dry at least 1 hour before walking on the floor. For a glossier floor, a second coat may be applied after 2 hours. Allow 24 hours before heavy traffic.

For best results: Always test in an inconspicuous section of the floor before use. Coverage should be 500 square feet per bottle. Do not apply the product too thin or streaking will occur. Coat the entire floor to ensure an even appearance.

  1. Clean
  2. Squirt and Spread
  3. Allow to Dry

Specifications

Classification Wood Maintenance
Wood Restoration
Brand Bona
Size 946 ml
Sold Since May 2, 2022
SKU WT760051164
UPC 737025000806
Composition

Water, acrylic polymer, urethane, wax,
Diethylene Glycol Monoethyl Ether

Drying Time

1 hour
Percent Cured after 24 hours : 90%
Max. Cure : 100% after one week

VOCs

Does not exceed 2%

Odor

Non-offending Odor

Aspect

Milky white liquid
Clear when dry

Shelf Life

2 years shelf life

Tools cleaning

Clean all tools and equipment with warm water

Luster

(60º)>85

pH

8.0

Solids

10-12%

Recommended Surfaces

Use every 3-4 months on all sealed hard surface flooring.

Similar Products

Complementary Products

Review

Nice finish

Heather Doucette · Jul 6, 2024

I tried using other similar products but nothing compares to this product.

          

Terms of Sales · Privacy · Cookies · En français