Enduragreen Bubble Breaker by Mohawk

Enduragreen Waterborne Bubble Breaker is a water-based additive designed to prevent bubbles from forming in water-based coatings such as paints, stains, and varnishes, which can help to improve the appearance and durability of the finished product. When adding Enduragreen Waterborne Bubble Breaker to a water-based coating, it helps to reduce the surface tension of the coating. This reduction in surface tension makes it easier for trapped air to escape, thus preventing bubbles from forming in the finished product.

Enduragreen Waterborne Bubble Breaker is easy to use and can be added directly to the coating at a recommended dosage rate of 0.25-1% by weight. The exact dosage rate may vary depending on the specific coating and application method being used.

The product is environmentally friendly and contains no hazardous air pollutants or volatile organic compounds (VOCs). It is also non-toxic and safe for use in food contact applications, making it suitable for use in a wide range of industries.

Documents

Technical Data Sheet Safety Data Sheet

Directions for use

Step by step guide for using Bubble Breaker:

Start by measuring the required amount of Bubble Breaker. The recommended amount is 1 ounce per gallon, but make sure not to exceed 3 ounces per gallon.
If possible, use electric drill mixing equipment for the best results.
If electric equipment is not available, mix the Bubble Breaker and the other ingredients very well for at least 3-4 minutes.
Check that the Bubble Breaker is incorporated well. If not, fisheyes may appear.
If fisheyes are present, continue to mix the product with the Bubble Breaker addition aggressively for another 3-4 minutes.
Once the Bubble Breaker is thoroughly mixed in, continue with the rest of the process.