Retarder For Low VOC Coatings by Mohawk

Ideal for extending the flow out and open time of low VOC, solvent based coatings in high heat and humid environments. Retarder for Low VOC Coatings is a VOC exempt solvent that will not affect the total VOC content of a product.

Advantages:

Complies with SCAQMD and CARB regulations
Will not increase VOC content
Use with M612 and MA612 series sealers and coatings to improve flow out and levelness of the film
Use to correct orange peel, overcome blushing, over spray and other finishing issues
Retarder for Low VOC Coatings may be added at a rate beginning at 5% by volume and increased as needed
Easy pour spout lid

For Professional Use Only

Documents

Technical Data Sheet

Directions for Use

Mohawk Retarder for Low VOC Coatings may be used to retard the flow and dry time of Mohawk M612-series and MA612-series coatings and sealers. Recommended additions begin at a rate of 5% by volume; do not exceed the maximum addition listed on individual product TDS. Stir thoroughly into coating.