Cutek QuickClean - Deck/Wood Cleaner by Cutek

Cutek Quickclean is the perfect way to regularly keep all your wood clean, and it prepares wood to optimize the performance of maintenance coats of Cutek Extreme.

It will easily remove dirt, grease and grime from your outside surfaces as well as even out Cutek Colourtone that has started to wear or erode unevenly on your wood.

Cutek Quickclean is a concentrate that should be diluted with water. The dilution will vary depending on the build-up of dirt/grease on the surface.

Powerful Outdoor Cleaner: General-purpose outdoor cleaner that removes dirt, grease and grime from outdoor surfaces
Perfect for Regular Wood Cleaning: Prepares wood for a maintenance coat of Cutek Extreme
Clean up Cutek Spills with Ease: Easily cleans up accidental spills of Cutek Extreme
Cleans All Hard Surfaces: Cleans all hard surfaces including composite decking, plastic, PVC, tiles, pavers, concrete and glass

Cutek Quickclean may not be able to remove all stains on wood. To rejuvenate grey, weathered wood or to remove stubborn stains such as iron stains, water marks, tannins, resins, mould and fungus, etc. you will need to use Cutek Wood Reviver.

Cutek Quickclean will not remove paint and wood coatings from your wood. In these instances, remove with Cutek Wood Stripper.

Documents

Technical Data Sheet Safety Data Sheet Brochure

Directions for Use

Before Applying

It is important for the user to determine the suitability of Cutek Quickclean for its intended application. ALWAYS test product on a small test area, referring to the dilution guidelines, before making a full mixture and applying to any large sections. As substrates and conditions can vary significantly, testing will enable you to accurately estimate the dilution ratio, working time, and amount of Cutek Quickclean required to complete your project. It will also enable you to perfect the cleaning technique that works best for your situation.

Safety and Precautions

Before you begin to Prepare and Protect your wood, note the hazards and precautions and ensure that you have obtained and know how to use the correct safety equipment.

When using Cutek Quickclean, all adjacent surfaces and vegetation must be adequately protected. It is also important to be aware of the potential for damaging wind drift into areas with cars or pedestrian traffic when rinsing. Water flush all equipment, vegetation, paths, concrete, asphalt and other adjacent surfaces before and after contact.

Dilution and Coverage

Remove grease, oil, dirt and grime (wood structures and composite decking):
- Recommended Dilution: 1:8 (1 part Cutek Quickclean to 8 parts water)
- Mixed Volume: 17 L / 4.5 US gal
- Coverage: 79 m² / 850 ft²
Plastic / PVC / ceramic tiles / canvas / metal:
- Recommended Dilution: 1:50 (1 part Cutek Quickclean to 50 parts water)
- Mixed Volume: 95.4 L / 25.5 US gal
- Coverage: 446 m² / 4,800 ft²

IMPORTANT: These figures represent typical averages for common substrates and are to be used as a guideline only.

Cutek Quickclean is a powerful general-purpose outdoor cleaner that should be diluted. Dilution and coverage can vary depending on the type of surface being cleaned and the build-up of dirt/grease on the substrate. Always test prior to making a full mixture to determine if the dilution being used is effective in cleaning your specific surface.

Application

Dilute the Cutek Quickclean concentrate with water as required and complete a test patch to ensure that the dilution being used is effective in cleaning.

Wet your substrate with water prior to applying Cutek Quickclean. Apply diluted Cutek Quickclean liberally with a brush, roller, broom or low-pressure garden sprayer. Let Cutek Quickclean do the work by leaving it on the surface for 5 to 15 minutes depending on the severity of dirt/soiling/grease.

It may be necessary to scrub stubborn stains moderately with a stiff fibre brush.

Removal

Once Cutek Quickclean has cleaned the substrate, it must be water rinsed off thoroughly. For best results, rinse using a pressure washer set to approximately 50 bar (750 p.s.i.) with a fan jet pattern.

CAUTION must be used to avoid damage to the wood fibre and ‘furring up’. Adjust your cleaning process by reducing the pressure or your operating distance from the wood. DO NOT use “turbojets” on wood.

Rinse from the highest point and work down methodically using long even strokes in the direction of the grain.

Where pressure washing is not practical, rinse off with clean water from a bucket or a garden hose using a light scrubbing action with a stiff brush.

Clean Up

Equipment may be cleaned with water. Ensure wash water is disposed in accordance with local regulations.

Protect with Cutek Extreme

Following the restoration of your wood with Cutek Wood Reviver, it is important to complete the restoration process by protecting your wood with Cutek Extreme.

Designed for and proven to work in the harshest of American environments, Cutek Extreme penetrates and diffuses deeply into the wood core to protect against liquid and gas phase moisture and extend service life.

Cutek Extreme is a High performance penetrating oil-based wood stabilizer with a unique self-healing effect that highlights the natural beauty of wood and controls moisture to improve dimensional stability and minimize cupping, warping and splitting.
Maintenance with Cutek Extreme is simple, easy and cost effective. Simply clean and recoat – no need to sand or strip.

Not protecting your wood with Cutek Extreme after cleaning will result in water damage and a faster weathering/graying process when exposed to the weather.

Preparation and Protection Guidelines

Specifications

Wood Condition and Desired Effect	Preparation	Protection	Add Cutek Colourtone?
New Wood Retain freshly oiled look or alter the wood colour	Clean with Cutek Wood Reviver (if tannin/water/iron stained), otherwise clean with Cutek Quickclean.	Apply 2 coats of Cutek Extreme.	YES
New Wood Stabilize & allow to naturally lighten/silver	Clean with Cutek Wood Reviver (if tannin/water/iron stained), otherwise clean with Cutek Quickclean.	Apply 2 coats of Cutek Extreme.	NO
Old Wood (Previously coated in Cutek Extreme) Retain freshly oiled look or alter the wood colour	Clean with Cutek Wood Reviver if maintenance has been neglected (grayed, heavily stained or excessive Colourtone build-up). Otherwise, clean with Cutek Quickclean.	Apply 1 coat of Cutek Extreme.	YES

Classification	Wood Maintenance
Brand	Cutek
Size	1.89 L
Sold Since	April 11, 2026
SKU	QC-64-CDN
UPC	857558006295
Composition	2-Butoxyethano, Poly(oxy-1,2-ethanediyl), .alpha.-sulfo-.omega.-hydroxy-, C12-14-alkyl ethers, sodium salts
Dilution	Mix with water before use. For most cleaning tasks, we recommend starting with a ratio of 1 part product to 8 parts water (e.g., 1 cup of product for every 8 cups of water). For very light cleaning, you can dilute it as much as 1 part product to 100 parts water.
Dilution	DILUTION & COVERAGE GUIDE To remove oil and fat based stains: Dilution: Full strength Mixed Volume: 1.89 L / 64 oz Coverage: Spot cleaning Wood and composite decking, wood shingles: Dilution: 1:8 (1 part Cutek to 8 parts water) Mixed Volume: 17 L / 4.5 gal Coverage: 79 m² / 850 ft² PVC and capped composite decking: Dilution: 1:20 (1 part Cutek to 20 parts water) Mixed Volume: 39.7 L / 10.5 gal Coverage: 186 m² / 2,000 ft² Plastic / PVC / ceramic tiles / canvas / metal: Dilution: 1:50 (1 part Cutek to 50 parts water) Mixed Volume: 96.4 L / 25.5 gal Coverage: 446 m² / 4,800 ft² All purpose glass cleaner: Dilution: 1:100 (1 part Cutek to 100 parts water) Mixed Volume: 190.9 L / 50.5 gal Coverage: 883 m² / 9,500 ft²
Storage	Cutek Wood Reviver can be stored for many years after initial use. To store correctly, store in a cool, dry area out of direct sunlight; lid must be airtight. Keep from freezing.
Tools	Brush, roller, broom or low-pressure garden sprayer, bucket, pressure washer, drop sheets and tarps, safety equipment.
pH	13

FAQ

Should I only use Cutek Quickclean to prepare my wood for a maintenance coat of Cutek Extreme?

Cutek Quickclean is an excellent exterior surface cleaner. Cutek Quickclean is also the best choice to clean your wood in preparation for a maintenance coat of Cutek Extreme.

Regular wood cleaning is important to maximizing service life of wood and with Cutek Quickclean, wood and other exterior surface cleaning is easy and cost effective.

Does Cutek Quickclean remove stains and rejuvenate my wood?

No. Cutek Quickclean powerfully cleans wood to remove surface dirt, grease and grime. While it can remove some stains, it is not effective in removing stubborn stains from wood and/or restoring wood back to its original colour. If you need to remove stubborn stains or restore grey and weathered wood, use Cutek Wood Reviver.