Operations Status during COVID-19   View Message  

MPX-30™ Mid-Pressure Compressor Spray Gun by Fuji Spray

New Product

$499.00   $399.00
Free shipping
Quebec, Ontario · More info

MPX-30™ Mid-Pressure Compressor Spray Gun is available in gravity feed and siphon feed models.

With its ergonomically designed handle to reduce user fatigue, the MPX-30™ provides increased application speed without sacrificing performance.

Compact, lightweight and easy to maintain, its nearly 13” wide fan pattern paired with a precise side-mounted fan pattern control minimize overspray and reduce waste.

The MPX-30™ features optimized internal air passages to provide increased atomizing air for modern high-solid coatings.

  • MPX-30™ technology combines rapid application and higher transfer efficiency
  • 100% stainless steel fluid passages suitable for water-borne and solvent-based coatings
  • Perfect for any type of professional spray finishing
  • Optimized air cap design results in a soft spray pattern and outstanding atomization
  • Recommended airflow and pressure: 13.8cfm at 36psi

2 Air Cap Sets Included

  • Gravity feed: installed with 1.4mm, extra 1.3mm included
  • Siphon feed: installed with 1.7mm, extra 1.4mm included
Additional air cap sets also available.

High-Pressure Regulator Gauge Included

High-Pressure Regulator Gauge included with all MPX-30 spray guns.

Compatible with 3M PPS Cup System

MPX-30 spray guns are compatible with 3M™ PPS™ Series 2.0 System Kits.

What’s In The Box

  • MPX-30™ Spray Gun (Gravity or Siphon)
  • 600cc Nylon Gravity Cup or 1 Qt Siphon Cup
  • High-Pressure Regulator Gauge
  • Wrench
  • Cleaning Brush
  • Manual
  • Extra 1.3mm air cap set included for gravity models
  • Extra 1.4mm air cap set included for siphon models

The Fuji Spray® MPX-30™ Gun has been developed to fill the gap between conventional high-pressure spray guns and HVLP. Using only medium pressure (mp) levels similar to reduced pressure (rp) spray guns, the MPX-30™ combines rapid application speed and higher transfer rates.

The MPX-30™ is a general purpose spray gun perfect for any type of professional spray finishing. Versatile in terms of application and performance handling, it applies all types of coatings with ease – including high solid materials.

The MPX-30™ is easy to operate, embodying the same familiar controls as any conventional high-pressure spray gun while offering many of the benefits of HVLP. The fan pattern control offers precise fan adjustment, reducing overspray and waste. The optimized air cap design results in a soft spray pattern and outstanding atomization.

Faster work is ensured by the particularly wide fan and the high material flow rates. At a spray distance of 8”, the fan pattern size ranges up to 13”.

The gun is compact, lightweight, and easy to handle. The ergonomic design allows the spray gun to feel comfortable in the hand for extended periods of time.

Fuji Spray® MPX technology is VOC-compliant, and ensures a transfer efficiency above 65%, as required by legislation. An added benefit is a considerable saving in paint, compared to conventional spraying equipment. Less thinning is required, allowing for the highest color match precision, high gloss and uniform paint distribution. It requires 13.8cfm @ 36psi and comes with a 1-year manufacturer’s warranty.

Quality

Most spray guns on the market install a stainless steel needle and nozzles. However, the fluid passages are often made of existing alloy gun material, which can corrode. The Fuji Spray® MPX-30™ Spray Gun features 100% stainless steel fluid passages in the gun, suitable for water-borne and solvent-based coatings. The spray gun body features a durable black electroplated finish. It was designed for full system application: solvent-based basecoats, low VOC colours or clear coat.

MPX Technology versus High Pressure

A conventional compressor spray gun achieves a high degree quality of finish, but also experiences excessive overspray and waste. Mid-Pressure (mp) can accomplish the exact same result, with the added advantage of higher transfer efficiency, reduced bounce-back, less overspray and huge material savings. The MPX-30 is an environmentally friendly spray gun.

MPX Technology versus HVLP

To qualify as HVLP, air flowing through the air cap must not exceed 10 psi. Generally speaking, the much lower velocity produces a softer, easier to control spray. This allows you to lay the paint on gently and not blast it on. Fuji MPX technology utilizes slightly more pressure than HVLP spray guns, achieving much faster application speed and higher atomization levels. The transfer efficiency rate is in excess of 65% and the quality of finish is equivalent to the best high-pressure spray finishes.

Variants

Gravity - 600cc Cup
6355G-MP-C-14K
$399.00 In stock
Siphon - 1 qt. Cup
6350S-MP-C-17K
$399.00 In stock

Specifications

Classification Spray Equipment / Spray Guns
Brand Fuji Spray
Sold Since May 1, 2020
Origin

Canada

Weight

502 g (17.70 oz)

Air Cap Set
Air Supply Pressure

36 psi at gun inlet (2.5 bar)

Air Consumption

13.8cfm (390L/min)

Air Inlet Size

1/4" BSP and NPS

Recommended Airflow & Pressure

13.8 cfm at 36 psi

Similar products

Complementary products

Review

There is currently no review for this product. Be the first to submit one!

          

Terms of Sales · Privacy · En français