Application Temperature

Above 50°F (10°C)

Assembly Time After Glue Application

25-30 minutes (70°F./50%RH)

Minimum Required Spread

Approximately 6 mils or 250 square feet per gallon

Required Clamping Pressure

Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods).

Method of Application

Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications. Note: Adhesive foams when cured. Protect finished surfaces from direct contact.

Cleanup

Mineral spirits while glue is wet. Scrape or sand off dried excess.

Limitations

Titebond Polyurethane Glue is not for structural applications or for use below the waterline. For ease of application, the glue, temperature and materials to be bonded should be above 50°F. Lower temperatures will cause the glue to thicken.