Application Temperature

Above 55°F

Open Assembly Time

5 minutes (70°F./50%RH)

Total Assembly Time

10-15 minutes (70°F./50%RH)

Minimum Required Spread

Approximately 6 mils or 250 square feet per gallon

Required Clamping Pressure

Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)

Method of Application

Plastic bottles for fine applications; glue may also be spread with a roller spreader or brush.

Cleanup

Damp cloth while glue is wet. Scrape off and sand dried excess.

Limitations

Titebond II Dark Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 55°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. Because of variances in the surfaces of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Titebond Technical Support Team at 1-800-347-4583. Not FDA approved for indirect food contact. Read MSDS before use. KEEP FROM FREEZING..