temperature Above 50°F.
Open assembly time:
10 minutes (70°F./50% RH)
Total assembly time:
20-30 minutes (70°F./50% RH)
Minimum required spread:
Approximately 6 mils or 250 square feet per gallon
Required clamping pressure:
Enough to bring joints tightly together (generally, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application:
Can be applied by roller or dip spreader, pressurized oil cans, plastic applicators, brush or stick.
Damp cloth while glue is wet. Scrape off and sand dried excess.
Titebond Liquid Hide Glue is not intended for exterior use or where moisture is likely. Not for
structural or load bearing applications. For exterior applications use Titebond III Ultimate Wood Glue or Titebond II Premium Wood Glue. Freezing may not affect the function of the product but may cause it to thicken. Agitation should restore product to original form. KEEP FROM FREEZING.
CAUTION: EYE IRRITANT. Contains ammonium rhodanate; dicyanodiamide. Contact with eye will cause irritation. Do not take internally. Not intended for use by children. If eye contact occurs, rinse with running water for at least 15 minutes. If ingested do not induce vomiting. Seek medical attention if eye irritation or gastric distress occurs. For additional information, refer to Material Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.