Mohawk Pre-Catalyzed Clear Lacquer Aerosol offers excellent flow out for touch-up use.
The dry film is very durable and adheres where other finishes will not. The product has been tested and approved for in-factory touch-up on catalyzed finishes.
Use Mohawk's E-Z Vinyl Vinyl Sealer to seal the surface.
Preparation : Shake for at least one minute after agitator balls rattle. Protect surrounding areas from spray.
Application: Hold can 12 to 14 inches from the surface and press spray button firmly. For spot repairs, use steady, even light strikes while spraying. Several thin coats give a better, faster drying finish than one heavy coat. Allow to dry for 1 hour before rubbing. For new finishes, use heavier coats. Clean spray by inverting can and spraying until no more lacquer is sprayed. For best results use only when can temperature is between 65° and 90 F.
We recommend sanding between every coat using a 320 or 400 grit paper.
Caution : Extremely Flammable. Wear protective glasses and gloves.
N-butyl acetate, Sweetened liquid petroleum gas, Butanol, Acetone, Propylene glycol monomethyl ether, Toluene, Isopropanol, Cellulose nitrate, cellulose ester
There is currently no review for this product. Be the first to submit one!
Be the first to know about our new products and sales.
Terms of Sales