Water Clear Acrylic Aerosol by Mohawk

5/5 · 1 review

5/5 · 1 review

Mohawk Water Clear Acrylic is an aerosol acrylic which produces a crystal clear, non-yellowing finish.

When a transparent finish is required over whites or light colors, Water Clear Acrylic is perfectly suited for the job.

Mohawk Clear Acrylic Lacquer can be sprayed onto almost any wooden, plastic, or chrome, brass and aluminum surface. .

Documents

Clean surface to be sprayed with a Wax Remover. For best results, can temperature should be between 18C - 32C (65F -90F).

Shake well before using for at least one minute after ball rattles to ensure color uniformity.
Point opening of spray button toward object, holding can 12 to 14 inches aay from surface to be coated.
Press spray button firmly. Use steady, even strokes.
Several thin coats give a better finish than one heavy coat.
Allow coating to become tacky between coats.
Clean spray button immediately by spraying with can upside down until no more product comes out. If clogged, remove spray button with a twisting motion and clean. Gently twist button onto can with opening turned away from you.