EM6000 Production Acrylic Lacquer by Emtech

5/5 · 4 reviews
In stock
from $36.95
Free shipping
on orders over $90
Quebec, Ontario · More info

EM6000 Production Acrylic Lacquer is a water-based acrylic lacquer formulated from advanced polymer resins which is HAPS free. EM6000 provides a unique self-leveling finish for commercial and industrial use.

Specially designed for furniture, cabinet and interior woodwork, EM6000 production lacquer provides an exceptional transparency, great adhesion, fast drying and a low VOC content.

EM6000 Production Acrylic lacquer features a unique adhesion system which allows to form a durable bond to a wide variety of synthetic surfaces like wood panels, carbon-fiber, PVC, ferrous and nonferrous metals.

Directions for use

Preparation:

  • Fine sand surface to be finished with the appropriate grade sandpaper based on the type of final finish required.

  • For application to ferrous metals it is necessary to apply an anti-rust primer such as
    Tremclad Water Based Rust Primer prior to application of EM6000.

  • If the surface to be finished has a grain-filling type glaze, sealer or paste; ensure that the systems are compatible with one another by preparing a test panel before proceeding.

  • Certain solvent-based fillers and glazes may prevent proper adhesion of the topcoat if not thoroughly cured. Ensure that grain fillers have been sanded with a minimum of 400-grit sandpaper and all contamination is removed. Oil-Based glazes should be air-dried and tested to ensure proper early adhesion of the water-based topcoat.

  • All surfaces to be finished must be clean and free of oil, dust and contamination that may cause fisheyes or poor adhesion. Clean surface with denatured alcohol or fresh water. Allow surface to thoroughly dry before proceeding.

  • Mix the product thoroughly.

  • Can be fortified with 2 to 5% of CL100 Cross-Linker

Application:

  • Apply the lacquer using an HVLP spray gun. The product can be used without being diluted with water or with the SA5 Retarder. However, the use of SA5 can be useful to slow down the drying time of the lacquer when applying in warm temperature.

  • Apply a first coat and let dry 20 minutes. Apply a second coat and let dry for 20 minutes. Repeat the operation until you obtain the desired finish.

  • If more than 24 hours have passed between two applications, lightly sand the surface using a fine sanding paper.

Use only in well ventilated areas. Avoid inhaling spray mist. Wear a NIOSH/MSHA approved respirator during spray applications.

Variants

946 ml · Flat $36.95 In stock
946 ml · Gloss $36.95 In stock
946 ml · Satin $36.95 In stock
946 ml · Semi-Gloss $36.95 In stock
3.78 L · Flat $96.95 In stock
3.78 L · Gloss $96.95 In stock
3.78 L · Satin $96.95 In stock
3.78 L · Semi-Gloss $96.95 In stock

Specifications

Category Lacquers
Brand Emtech
Sizes
  • 946 ml
  • 3.78 L
Sold Since November 21, 2013
Composition

Water, Acrylic Copolymer Resin, Dipropylene Glycol Monomethyl Ether, Propylene Glycol Monomethyl Ether

Coverage
  • 105 sq feet per liter
  • 400 sq feet per gallon
VOCs

31g/L

Origin

USA

Dilution

Eau, SA5 Retarder

Odor

Acrylic Odor

Aspect

Translucent liquid

Tools cleaning

Soapy Water

Luster
  • Flat
  • Semi-Gloss
  • Gloss
  • Satin
Color

Clear / Amber Effect

Tools
  • HVLP Spray gun: 1.3 mm or 1.5 mm needle set and corresponding air cap
  • Air-Assisted Airless: .09 - .11 tip set
Freeze/thaw stability

Avoid too many freeze-thaw cycles. If the product has frozen, allow the product to thaw at room temperature for 48 hours without stirring.

Similar products

Complementary products

Review

Great stuff

Peter Owen Goodale · Jan 30, 2015

Love working with this for my guitar/bass refinishes as well as finishes for my custom jewellery. Easy to work with and great results. Plus Artdec.ca customer service is some of the best I have had. Will be returning for more product with them.

There are 4 reviews in French for this product.

Display Reviews in French
          

Terms of Sales · Privacy · En français