EM2000wvx Waterborne Alkyd Varnish by Emtech

5/5 · 2 reviews
from $35.95
Free Delivery
Quebec, Ontario · More info

EM2000wvx waterborne alkyd varnish is an exterior/interior hybrid varnish that creates the warm glow of a traditional alkyd based varnish.

EM2000wvx varnish is perfectly designed for many types of projects, including furniture, cabinetry and surfaces exposed to moisture and UV rays, such as window and door trim. Specially formulated for industrial spray applications, EM2000wvx can also be applied with a brush or pad for ease of use versatility.

Multiple coats of EM2000wvx can be applied within a 24-hour period allowing for a faster job completion EM2000wvx dries and cures at room temperature without the use of catalyst. .

Directions for use


  • All surfaces to be finished must be clean, dry and free of excess contamination.
  • Sand the surface using a 220 grit sandpaper.
  • Remove dust with a water-damped, lint-free cloth. Do not use oil / wax tack clothes.
  • If the surface to be finished has a grain filler, glaze or solvent-based stain applied to it, ensure that these products are compatible with the EM2000wvx.
  • Mix varnish gently, then strain through a medium-mesh paint filter before using. Allow the strained varnish to settle before using.
  • Can be fortified with 2 to 5% of CL100 Cross-Linker


  • Using a spray gun, poly-bristle brush ou varnish roller, apply 1 to 3 coats of EM2000wvx diluted with 10 % of distilled water to act as a sealer coat. Let dry for a minimum of 1h30 to 2h or when the sealer coat gently powders when sanded without clogging the sandpaper.
  • Apply many coats of EM2000wvx as is or diluted with 5 % of distilled water. Let dry for a minimum of 1 hour between each coats. Sand between every layers using a 400-600 grit sandpaper to remove imperfections.
  • Let the surface dry in a warm and dry environment. Complete chemical cure takes place after 150 hours.
Use only in well ventilated areas. Avoid inhaling spray mist. Wear a NIOSH/MSHA approved respirator during spray applications.


946 ml · Flat
$35.95 In stock
946 ml · Gloss
$35.95 In stock
946 ml · Satin
$35.95 In stock
946 ml · Semi-Gloss
$35.95 In stock
3.78 L · Flat
$110.95 In stock
3.78 L · Gloss
$117.95 In stock
3.78 L · Satin
$110.95 In stock
3.78 L · Semi-Gloss
$110.95 In stock


Classification Wood Lacquers
Brand Emtech
  • 946 ml
  • 3.78 L
Sold Since November 21, 2013

Hybrid Alkyd Resin Dispersion, Water, Propylene Glycol Monomethyl Ether

  • 105 sq feet per liter
  • 400 sq feet per gallon





Distilled water


Acrylic odor


Clear liquid


Keep in an hermetic container at room temperature.Keep from freezing. Keep away from Fire and Heat.

Tools cleaning

Soapy water

  • Gloss
  • Semi-Gloss
  • Satin
  • Flat

Clear / Amber Effect

  • Spray gun
    • Compressed Air HVLP: 1 .3mm – 1.5mm needle set and corresponding air cap
    • Air-Assisted Airless: .09 - .11 tip set
    • Airless: Ultra-Fine or Fine Grade tip set
  • Paintbrush
  • Stain pad
Freeze/thaw stability

Avoid too many freeze-thaw cycles. If the product has frozen, allow the product to thaw at room temperature for 48 hours without stirring.

Similar Products

Complementary Products


Quick delivery !

James Binkert · Sep 25, 2020

I’ve previously sourced this product elsewhere and tho it was a few dollars more at Ardec, their free shipping and very quick delivery quickly closed the gap.
The Target emtech coatings are hard to beat for a superior finish that is easily applied.

There is 1 review in French for this product.

Display Reviews in French

Terms of Sales · Privacy · En français