Tone Finish Clear Lacquer aerosol is a nitrocellulose clear lacquer with a high solid concentration that eliminates the need to mix large quantities when restoring or finishing smaller projects.
Tone Finish Clear Lacquer is easy to apply, dries fast and creates a resistant finish.
Use the Pre-catalyzed Sanding Sealer before applying Tone Finish Clear Lacquer.
Use Mohawk's E-Z Vinyl Vinyl Sealer: to seal the surface.
Preparation : Shake for at least one minute after agitator balls rattle. Protect surrounding areas from spray.
Application: Hold can 12 to 14 inches from the surface and press spray button firmly. For spot repairs, use steady, even light strikes while spraying. Several thin coats give a better, faster drying finish than one heavy coat. Allow to dry for 1 hour before rubbing. For new finishes, use heavier coats. Clean spray by inverting can and spraying until no more lacquer is sprayed. For best results use only when can temperature is between 65° and 90 F.
We recommend sanding between every coat using a 320 or 400 grit paper.
Caution : Extremely Flammable. Wear protective glasses and gloves.
631 g / L
Strong solvent odor
Keep containers closed when not in use. Store in cool well ventilated space away from incompatible materials.
Gloss, matte, flat, satin,
· Apr 16, 2019
Needed this for the headstock on my guitar. Did the job well and no issues.
2 reviews in French for this product.
Be the first to know about our new products and sales.
Terms of Sales