Open Assembly Time
15 minutes (70°F./50% RH)
Total Assembly Time
20-25 minutes (70°F./50%RH)
Minimum Required Spread
Approximately 6 mils or 250 square feet per gallon
Required Clamping Pressure
Enough to bring joints tightly together (generally, 30-80 psi for HPL, 100-150 psi for softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Method of Application
Easily spread with a roller spreader or brush, or may be transferred to plastic bottles for finer gluing applications.
Damp cloth while glue is wet. Scrape off and sand dried excess.
Titebond II Extend Wood Glue is not for continuous submersion or for use below the waterline. Not for structural or load bearing applications. Do not use when temperature, glue or materials are below 60°F. Due to low pH, product may cause corrosion on metal surfaces, test product before using where rusting/corrosion may be of concern. Freezing may not affect the function of the product but may cause it to thicken. If product appears to have settled, stir to ensure uniformity. Because of variances in the surface of treated lumber, it is a good idea to test for adhesion. For best results gluing exotic or oily woods, such as Ipe and Teak, please contact our Titebond Technical Support Team at 1-800-347-4583. Read MSDS before use. NOTE: STIR PRODUCT BEFORE USE TO ENSURE UNIFORMITY. KEEP FROM FREEZING.