Rubio Monocoat Oil Plus 2C by Rubio Monocoat

New Product

from $79.95
Free Delivery
Quebec, Ontario · More info

Rubio Monocoat Oil Plus 2C is a new generation of finishing oil that colors and protects wood in just a single coat. Oil Plus 2C oil is ideal for floors, furniture, stairs. It also offers excellent resistance to water and heat, making it suitable for kitchens and bathrooms.

Rubio Monocoat Oil Plus 2C is a certified Fit For Food oil, a European certification for products determined to be safe for contact with food.

Rubio Monocoat Oil Plus 2C is an ecological product, with a content of VOCs of 0%. Maintenance of surfaces finished with this product is easy, and it does not cause seams or overlap marks. RMC Oil Plus 2C has exceptional hiding power of 30 to 50 square meters per liter (320 to 540 square feet per liter), depending on the type of surface being treated.

The combination of the oil (A) with the accelerator (B) guarantees fast drying and hardening as well as superior protection.

  • Colours and protects in 1 layer
  • Enhances the natural look and feel of the wood
  • Environmentally friendly: 0% VOC
  • Does not contain any water or solvents
  • Easy to maintain
  • No overlaps or starting marks

Component A

Oil Plus 2C Component A is also sold separately in small sizes for consumers who wish to proceed with sampling oil colours before undertaking a finishing project.

Pure vs Natural Colour

The Pure variety contains no colouring pigments while Natural contains creamy white/yellowish pigments. Although Pure contains no pigments, Linseed Oil (the base ingredient in RMC Oil Plus 2C) has a colour that slightly enhances/darkens wood compared to its raw state. Although Pure is the most popular colour in the Rubio Monocoat range, if the goal is to keep the colour of your wood in its raw state, you should incorporate just enough pigments in order to counter the darkening effect of any wood finishing oil. In order to ensure the desired effect, it is strongly recommended to carry out a colour test beforehand or to contact our technical service (you must know the wood species and also provide us with photographs beforehand). For further information, you can also take a look at this blog entry from Rubio Monocoat.

Colors shown are for information purposes only: Actual colors may vary from the color on your screen due to monitor differences.

Directions for use

  1. Sand the surface scratch-free. Finish with screening net 100 to 150, depending on the sanding method used.
  2. Vacuum thoroughly, eliminate remains of dust with Rubio Monocoat Cleaner or WoodPrep and wait until the surface is completely dry. Consult the Technical datasheet of the product you will use before proceeding.
  3. Mix component A to obtain a homogeneous mixture, then mix the two components thoroughly for 1 to 2 min. respecting a ratio of approximately 3 units of component A to 1 unit of component B (ratio 3: 1). Rubio Monocoat Oil Plus 2C should be used within 4 - 6 hours maximum after mixing components A and B.
  4. Spread a small amount of RMC Oil Plus 2C using an applicator, a cloth lint-free cotton, a polisher or other suitable tool. Note that it does not matter how the oil is initially applied. The crucial aspect is to polish well using the applicator pad or the polisher afterwards in order to ensure proper penetration of the oil into the wood grain. For manual application on floors, it is necessary to work in sections.
  5. After polishing the surface well with the applicator pad or a polisher, allow the oil to sit for 3 to 5 minutes on the surface. Then wipe off ALL excess oil from the surface using a cotton cloth. The key to a good application is to remove ALL oil that remains on the surface, wiping it off the wood completely. It is impossible to remove too much oil: the oil that will color and protect the wood has already penetrated the wood grain at this point. Allowing excess oil to remain and dry on the surface will cause problems (sticky floor). The surface should feel almost dry to the touch after you finish applying and wiping off the excess oil.
  6. Let the surface dry for 12 to 24 hours depending on ambient conditions (humidity and temperature).
  7. Vacuum cleaning can be done after 2 days at the earliest. Cleaning with soap and water can be done after 5 days, allowing for complete cure.

For mechanical application (optional but recommended for floors), for the restoration of a surface already treated with Rubio Monocoat Oil Plus 2C, and for any additional information, please refer to the product data sheet.

Tips & tricks:

  • The product may NOT be diluted!
  • Stir the product well before application.
  • When using several containers at one site, it is required to mix them for an even result.
  • Please consult your distributor if you want to use the A component without the B component (accelerator).
  • After application, the surface may appear a bit glossy. This will disappear after cleaning 2-3 times with Rubio Monocoat Universal Soap or Rubio Monocoat Surface Care.
  • If you want a more intense colour, use Rubio Monocoat WoodPrep instead of Rubio Monocoat Cleaner. For more info please consult the technical datasheet of Rubio Monocoat WoodPrep.
  • Rubio Monocoat Tannin Primer can be used before applying Rubio Monocoat Oil 2C for horizontal surfaces often subjected to liquids, such as worktops or bathroom furniture. For more info please consult the technical datasheet of Rubio Monocoat Tannin Primer.
  • The smoother the surface is, the less oil and pigments will penetrate in the wood resulting in a less coloured surface.
DANGER OF COMBUSTION - Keep out of reach of children. Materials such as rags used with this product may begin to burn by themselves. After use, put rags in water or lay flat to dry, then discard.


350 ml · Ash Grey
$99.95 In stock
350 ml · Black
$99.95 In stock
350 ml · Bourbon
$99.95 In stock
350 ml · Castle Brown
$99.95 In stock
350 ml · Charcoal
$99.95 In stock
350 ml · Chocolate
$99.95 In stock
350 ml · Cornsilk
$99.95 In stock
350 ml · Cotton White
$99.95 In stock
350 ml · Dark Oak
$99.95 In stock
350 ml · Havanna
$99.95 In stock
350 ml · Ice Brown
$99.95 In stock
350 ml · Mahogany
$99.95 In stock
350 ml · Mist
$99.95 In stock
350 ml · Mist 5%
$99.95 In stock
350 ml · Natural
$99.95 In stock
350 ml · Oak
$99.95 In stock
350 ml · Oyster
$99.95 In stock
350 ml · Pine
$99.95 In stock
350 ml · Pure (clear) $79.95 In stock
350 ml · Savanna
$99.95 In stock
350 ml · Sky Grey
$99.95 In stock
350 ml · Smoke
$99.95 In stock
350 ml · Super White
$99.95 In stock
350 ml · Walnut
$99.95 In stock
350 ml · White
$99.95 In stock
350 ml · White 5%
$99.95 In stock
1.3L · Pure (clear) $229.95 In stock


Classification Oils & Oil Finishes for Wood
Brand Rubio Monocoat
  • 350 ml
  • 1.3L
Sold Since July 9, 2021
Drying Time
  • Drying: 12-24 hours
  • Curing: 5 days (80% in 2 days)

Rubio Monocoat Oil Plus 2C may be used for a maximum of 4-6 hours after mixing A & B component together.

  • 100 ml: 30/50 sq ft
  • 375 ml: 105/175 sq ft
  • 1 L: 300/500 sq ft

0 g / L




Min. + 5°C, max. + 30°C

The product can be stored up to 36 months in dry conditions and in its original packaging.


Similar Products

Complementary Products


There is currently no review for this product. Be the first to submit one!


Terms of Sales · Privacy · En français