Osmo 2K Wood Oil is not ready to use. Shortly before the application, add the hardener (mixing ratio 8:1 vol.-%) and mix both components thoroughly. Do not thin. Pot time is approx. 3-4 hours. Wood surface must be clean, sanded, dry and frost-free (moisture content
max. 20%). Always wear a dust mask while sanding. Fill small cracks, larger joints or holes in wood (Osmo Wood Filler or Osmo Wood Putty 7350). Sand wood surfaces carefully. Begin with coarse sandpaper – final sanding work for flooring P 120-150, for furniture P 220-
240. Before oiling the surface, remove sanding dust with a broom or vacuum cleaner.
Methods of Application:
Apply 2K Wood Oil thinly with Osmo Double Blade Scraper. On chamfered flooring, apply 2K Wood Oil in sections thinly with Osmo Microfibre Roller, without filling the joints. Wait approx. 20-40 minutes for the oil to penetrate the wood. Afterwards buff oil into wood and even out the surface with a single disc machine and a white or beige pad (or ideally on furniture with Osmo HandXcenter and a white pad). Leave the surface to dry. Note: If the pad leaves streaks due to too much product, we recommend turning over the pad or replacing it. To prevent a possible pressure buildup in the container, allow oil and hardener mixtures to completely react before closing (approx. 12-16 h).
Cleaning of tools:
With Osmo Brush Cleaner (free of aromatic compounds).
Approx. 24 hours (normal climatic conditions, 23 °C/50 % rel. humidity). Ventilate well while drying. Lower temperatures and/or higher air humidity may increase drying times.
Product coverage for 1 coat is 40-50 m². It depends significantly on the character of the wood. All information refers to smooth and planed/cut surfaces. Other surfaces may lead to deviations in coverage.
2K Wood Oil can be used solely with the hardener which was developed for it. Leftover mixed product cannot be used after pot time has expired and must be disposed appropriately. Wood surfaces treated with 2K Wood Oil are easy to maintain. Remove coarse dirt with a broom or a vacuum cleaner. To clean, add Osmo Wash and Care concentrate to mop water and clean the surface with a damp (not wet!) mop. To refresh and clean intensively, use Osmo Liquid Wax Cleaner when necessary. If more sheen
is desired, after thoroughly drying apply Osmo Liquid Wax Cleaner thinly and polish when dry.
Component 1 Oil: Do not get in eyes, on skin, or on clothing. Use only outdoors or in a well-ventilated area. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Warning: Wash out any used cloth impregnated with this product immediately after use or store in an airtight container (danger of self-ignition). Safety data sheet available on request.
Component 2 Hardener: Harmful if inhaled. May cause respiratory irritation. May cause an allergic skin reaction. Avoid breathing mist/vapours/spray. Wear protective gloves. Dispose of contents/container in accordance with chemical waste disposal regulations.