RMC Universal Maintenance Oil by Rubio Monocoat

5/5 · 1 review

RMC Universal Maintenance Oil by Rubio Monocoat

5/5 · 1 review

RMC Universal Maintenance Oil is a product designed used to refresh wood treated with Rubio Monocoat Oil Plus 2C, as well as to revitalize surfaces not treated with Rubio Monocoat. The frequency of maintenance depends on the degree of stress on the surface.

RMC Universal Maintenance Oil nourishes the wood, gives it a fuller appearance (satin gloss) and improves its resistance to liquids.

It is recommended to apply this treatment just before the color of the treated surface fades. When the treated surface shows too much wear or too much damage or when color restoration is required, maintenance should be carried out with Rubio Monocoat Oil Plus 2C in the original color.

Documents

Technical Data Sheet Safety Data Sheet

Directions of use

This product may NOT be diluted.*

Treatment with RMC Universal Maintenance Oil can easily be carried out without prior professional knowledge.

Eliminate all dirt and dust from the surface.
Clean the surface thoroughly with water and RMC Soap. Rinse well with clean water to remove all soap residue. Leave it to dry completely.

Manual application

Apply the oil with a cloth, stain brush or sponge.
Use very little product to prevent the floor from becoming sticky, keeping in mind that the surface will have to be completely wiped 15 minutes after application.
Each treated area should be wiped dry within 15 minutes with a paper towel or lint-free cotton cloth.
Ensure sufficient ventilation, so that the surface should be dry after 6 to 8 hours.
Clean only with a damp cloth during the first week. Subsequently, cleaning with RMC Soap is allowed.

Mechanical application

Apply the oil with a polisher and a beige pad. Preferably treat areas of 2 to 4 square metres (20 to 40 square feet).
Use very little product to prevent the floor from becoming sticky, keeping in mind that the surface will have to be completely wiped 15 minutes after application.
Each treated area should be wiped dry within 15 minutes with a paper towel or lint-free cotton cloth. If using a polisher, wipe dry using a white pad.
Ensure sufficient ventilation, so that the surface should be dry after 6 to 8 hours.
Clean only with a damp cloth during the first week. Subsequently, cleaning with RMC Soap is allowed.

DANGER OF COMBUSTION - Keep out of reach of children. Materials such as rags used with this product may begin to burn by themselves. After use, put rags in water or lay flat to dry, then discard.

Variants

100 ml · Black	$37.99	Out of stock
100 ml · Pure	$37.99	In stock
100 ml · White	$37.99	In stock
500 ml · Black	$112.99	In stock
500 ml · Pure	$112.99	In stock
500 ml · White	$112.99	In stock

Specifications

Classification	Wood Maintenance
Brand	Rubio Monocoat
Sizes	100 ml 500 ml
Sold Since	July 8, 2021
Coverage	0,5 l = 75 – 100 m2 (800 - 1075 sq. ft., depending on wear. Use very little product to prevent the floor from becoming sticky
VOCs	0 g/L
Origin	Belgium
Aspect	Liquid mixture of natural oils and hard wax
Storage	The product can be stored for up to 12 months. Store in dry conditions and in the original packaging.

FAQ

How can you fix dull areas on a floor that was treated with Rubio Monocoat's Oil Plus 2C Pure?

This type of problem occurs when the floor lacks a sufficient amount of oil, either due to premature wear or applying insufficient product during the initial application.

To correct the issue, it is necessary to thoroughly clean the floor using Rubio Monocoat's Universal Maintenance Soap. Once the surface is clean and completely dry, apply Rubio Monocoat's Universal Maintenance Oil according to the manufacturer's recommendations.