INSTRUCTIONS

• Do not dilute.
• Shake well before use.
• Spray wood surface with water, then apply StainStripper using a synthetic brush or roller.
• To ensure product effectiveness, keep the surface wet with stripper by misting with water.
• Allow StainStripper to work on the surface for approximately 30 minutes. Some areas may require multiple applications or additional time.

RINSING

• Test a small area by scrubbing with a bristle brush to check if the coating is easily removed and the surface is ready for rinsing.
• When ready, scrub the surface with a firm bristle brush or long-handled push broom.
• Rinse thoroughly with water using a garden hose or pressure washer (not exceeding 1000 psi).
• Rinse any residue from plants.

BRIGHTENING

• Use Messmer’s Wood & Deck Part B Brightener to brighten the wood and restore its pH before applying coatings.

THINNING RECOMMENDATIONS

• Thinning is not recommended. The product can be used as supplied.

CLEANUP

• Clean tools and brushes with water.

PRECAUTIONS

• Deck surface may become slippery; use caution.
• Apply product at temperatures between 10°C and 32°C.
• Avoid applying in direct sunlight.
• Protect aluminum surfaces (e.g., window frames). Product may damage metal surfaces if left in contact.
• Rinse thoroughly from glass before the product dries.
• Wet down surrounding vegetation before and after application to avoid damage to plants.