Pro Finish Aerosol System - Blush Stopper (555) by DFP

White, cloudy blushing in lacquer finishes, caused by humidity, unbalanced solvents, low spraying temperatures, or poor air circulation on a drying surface, can lead to costly and time-consuming repairs.

DFP's Pro Finish Aerosol System Blush Stopper helps release trapped moisture from the finish, leaving behind a smooth, clear, and blush-free surface—often eliminating the need for sanding, stripping, and refinishing.

Documents

Technical Data Sheet Safety Data Sheet

Directions for Use

Clean surface of contaminants using silicone-free solvents such as a cleaning thinner or the DFP Wax-Off.
Keep air and surface temperature between 15-25°C.
SHAKE WELL BEFORE USING. If you don’t hear the mixing ball when shaking, GENTLY tap the base of the can on a hard surface to loosen it.
Point spray nozzle at target surface and spray side-to-side moving outwards from
about 30-40cm.
Work in thin coats to avoid sagging or cracking and wait for each coat to dry before re-coating.
Invert can and spray until only propellant comes out to clear the nozzle and
tube.
See SDS for health and safety measures.

Specifications

Classification	Wood Restoration
Brand	DFP - Dover Finishing Products
Sold Since	December 3, 2024
UPC	059597685558

Review

There is currently no review for this product. Be the first to submit one!