Pro Finish Aerosol System - Opaques by DFP

DFP's Pro Finish Opaque line offers opaque white and black tones that provide semi-transparent finishes when applied over a standard sealer or existing finish, and rich, opaque finishes when used with the white or black primer.

Documents

Technical Data Sheet Safety Data Sheet (Primers and Sealers) Safety Data Sheet (Opaque, White) Safety Data Sheet (Opaque, Black)

Directions for Use

Clean surface of contaminants using silicone-free solvents such as a cleaning thinner or the DFP Wax-Off.
Keep air and surface temperature between 15-25°C.
SHAKE WELL BEFORE USING. If you don’t hear the mixing ball when shaking, GENTLY tap the base of the can on a hard surface to loosen it.
Point spray nozzle at target surface and spray side-to-side moving outwards from
about 30-40cm.
Work in thin coats to avoid sagging or cracking and wait for each coat to dry before re-coating.
Invert can and spray until only propellant comes out to clear the nozzle and
tube.
See SDS for health and safety measures.

Variants

Black Flat (322)	$19.95	In stock
Black Gloss (320)	$19.95	In stock
Black High Gloss (340)	$19.95	In stock
Black Semi-Gloss (321)	$19.95	In stock
White Antique (313)	$19.95	In stock
White Flat (302)	$19.95	In stock
White Gloss (300)	$19.95	In stock
White Primer (330)	$19.95	In stock
White Semi-Gloss (301)	$19.95	In stock

Specifications

Classification	Wood Lacquers
Brand	DFP - Dover Finishing Products
Sold Since	December 3, 2024

Review

There is currently no review for this product. Be the first to submit one!