Check Stop - End Grain Protective Wax by Broda

Broda Check Stop Wax is a clear, thick, wax emulsion end sealer designed to protect freshly cut logs and lumber from damaging end splits and checks during the drying process. Ideal for both softwoods and hardwoods, this product prevents up to 90% of end checks and drying splits, ensuring the wood remains in excellent condition.

Its low-VOC formula is fungal resistant, water repellent, and vapour permeable, making it a perfect solution for maintaining the integrity of wood in both indoor and outdoor applications.

Ecologically-sensitive, Low COV
Hi-build treatment
Soap and water cleanup
Applies white, dries transparent
Non-flammable
Helps to prevent blue/sap staining

Documents

Technical Data Sheet

Directions for use

Preparation

Preparation is critical to a successful project.
Ensure wood is clean and free of sawdust and debris

Working Procedure

Stir well before application
Apply in proper conditions with an ideal temperature of 21°C (70°F) and relative humidity of approximately 50%
Do not apply below 5°C or above 25°C Saturate the wood surface to achieve the required coverage

Cleaning and Supplies

Clean all application equipment with warm soapy water before the product dries.
Check Stop Wax shelf life when stored in ideal conditions 2 years.
Store at a temperature of between 10ºC–30ºC (50ºF–86ºF).
Keep containers tightly closed. Protect from freezing.
Dispose according to local, provincial, or federal requirements or recycle at a local paint recycling depot.

Variants

1 L	$36.95	In stock
3.78 L	$82.95	In stock

Specifications

Classification	Wood Waxes
Brand	Broda
Sizes	1 L 3.78 L
Sold Since	April 7, 2025
Drying Time	20°C (68°F): 2 hours
Coverage	25 sq.ft/quart 100 sq/ft./gallon Coverage will depend on wood species, texture, and porosity.
VOCs	6.5g/L
Odor	Low was odour
Aspect	White paste, transluscent once dried
Storage	Check Stop Wax shelf life when stored in ideal conditions 2 years. Store at a temperature of between 10ºC–30ºC (50ºF–86ºF). Keep containers tightly closed. Protect from freezing.
Tools cleaning	Soap & Water
Viscosity	2000 CPS
pH	8.7
Recommended Surfaces	Use on: CLT panel edges and MASS timber components, glulam ends, log ends, timber ends, pressure treated wood, exotic hardwood decking, IPE decking, woodturning blanks, and live-edge wood slabs
Number of Coats	1st coat heavy 2nd coat for larger projects