Directions for Use

1. Connect the irradiation head to the driver using the supplied cable, ensuring all connections are securely tightened.
2. Insert the power cord into the unit and plug it into a grounded 110 V outlet.
3. Turn on the driver’s power switch.
4. Activate the irradiation head. Make sure it does not come into direct contact with any surfaces, as this may cause burns.
5. The device is equipped with built-in temperature controls and will shut off in the event of overheating. Allow the unit to cool down before resuming use.

Maintenance

• Make sure the power outlet and grounding are secure.
• Ensure that the control line and irradiation head connections are tightly secured.
• Do not place heavy objects on the motor.
• Keep the driver and the head clean, with clear ventilation.
• Make sure the lens covering the lamps is clean and free of dust or contaminants.
• Store the irradiation head and the motor safely.

Cleaning the air outlets

• Turn off the device and unplug it before cleaning.
• Do not disassemble the device for internal cleaning.
• Avoid using chemical cleaners, benzene, paint thinners, powders, or solvents.

Cleaning the ventilation inlets and outlets

• Clean the motor housing with a soft, dry cloth, using compressed air around the ventilation inlets and outlets.
• For stubborn stains, use a dry cloth lightly moistened with isopropyl alcohol.
• If the filter is dusty, it may reduce cooling efficiency. Clean it at least once a week in dusty environments.