Preparation : Sand evenly with 120 grit sandpaper and dust off the surface. Stir the content thoroughly. Dilute with 30% oil thinner.
Application : Apply a generous oil coat with a stain pad, a cotton rag or a stain applicator. After 15 to 20 minutes, remove any excessive oil by rubbing the surface with a cotton rag. For a smoother finish, sand lightly between each coat with 600 or 800 grit sandpaper.
Application tools : Stain pad, stain applicator, cotton rag, paintbrush
Number of coats : 3 coats
Drying time :
- First coat : 12 hours
- Other coats : 24 hours
- Utilization : 2 days
- First damp cleaning : 14 days
Concrete, slate, clay : Linseed oil can also be used to seal concrete, slate or clay. The application is the same as for wood. The number of coats required may vary depending on the porosity of the surface.
DANGER OF COMBUSTION Keep out of reach of children. Materials such as rags used with this product may begin to burn by themselves. After use, put rags in water or lay flat to dry, then discard.