Preparation : Important! The surface must be clean (free of wax, grease or oil), dry, evenly sanded with 120 grit sandpaper (for previously varnished floors there must not remain any trace of gloss.) and thoroughly dusted.
Vigorously shake the container and let stand 10 minutes before applying.
Application : The application must be made at an ambient temperature above 15 °C. Apply varnish in the direction of the wood grain using a synthetic bristle paintbrush, a stain applicator or a paint roller (5 to 10 mm). Between coats, let it dry for 3 hours before sanding with 180 grit sandpaper.
Application tools : Synthetic bristle paintbrush, Stain applicator, Paint roller (5 to 10 mm)
Number of coat :
- On bare or stained floor: 3 coats
- On previously varnished floor: 2 coats
Drying time :
- Between coats: 3 hours
- Cautious traffic: 4 hours
- Put back the furniture: 24 hours
- Put back the carpet: 10 days
- First damp cleaning: 10 days
DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS - MAY IRRITATE EYES Do not mix with other household chemicals. Do not breathe fumes. Keep out of reach of children. Do not get in eyes. FIRST AID TREATMENT Contains Diethylene glycol monobutyl ether. If swallowed, call a Poison Control Centre or doctor immediately. Do not induce vomiting. If in eyes, rinse with water for at least 20 minutes. If breathed in, move person to fresh air.
