Epifanes Mahogany Stain is a quick drying, impregnating stain formulated specifically for mahogany and other marine woods. This stain provides a warm, rich, red/brown mahogany color. Depending on desired degree of intensity, a maximum of 3 coats may be applied on bare wood.
Recoatable with Epifanes one-and two-component varnishes. It is possible to mix this stain (10% max) with Epifanes varnish, creating a lightly tinted finish for camouflaging color differences in an existing system.
For interior and exterior use above the waterline.
Preparation: Clean wood and sand surface using 180-220 grit dry abrasive paper. Remove dust. Degrease thoroughly and allow to dry. Do not use water.
Application: Shake well before use. May be applied by brush or roller. Apply in thin layers only in direction of the wood grain. Allow each coat to dry for at least 2 hours. No sanding is needed between coats. Do not apply in direct sunlight or under hot conditions.
Drying time: 2 hours at 18 degrees C (65F). When applied under 18 degrees Celsius, longer drying times can be expected.
500 ml is sufficient for 50-75 sq. ft. (4-7 sq. metres), depending on the porosity and/or density of the wood.
There is currently no review for this product. Be the first to submit one!
Be the first to know about our new products and sales.
Terms of Sales