SamaN water-based wood stain is a wiping stain recommended for interior woodworks and wood furniture. It can be used on any wood type.
SamaN stains are perfectly stabilized water-based solutions. This will allow you to mix several colors in order to obtain an infinity of shades, as you would with watercolor paints.
SamaN water-based stain is ready to use, needs a single application, does not require any conditioner, is non-flammable, and provides a higher-than-average coverage.
Preparation: Surfaces must be clean, dry and free of wax, grease, dirt and dust. Sand surface to eliminate any imperfection. Do not use steel wool.
Application: Mix the the stain thoroughly before use. Put a small quantity of stain onto a sponge and rub along the wood grain. Remove the excess stain with a clean, soft cloth. Work on small sections at a time to avoid allowing the stain to dry between applications. Let dry an hour before covering the stained surface with a clear finish.
Drying time: Approximately an hour at 20°C and 50% relative humidity
15-20 square meters per liter (160-215 square foot per liter)
Clean tools with soapy water
Compatible with any wood varnish. Several colors can be mixed to obtain an infinity of shades.
· Aug 7, 2018
These stains are vibrant and saturate well. The application is easy and very even. As long as you make sure to raise the grain before doing it. They say they don't raise the grain but it's not true. But if the grain has been raised and sanded then it applies beautifully and makes for a wonderful stain.
3 reviews in French for this product.
Be the first to know about our new products and sales.
Terms of Sales