Review posted by Philippe Gratton

Dewaxed Platina Shellac Flakes

good product BUT...

Philippe Gratton · Feb 22, 2022

this is ***not** dewaxed shellac. Or, at least, it is not completely dewaxed. Just see the pictures bellow. Now, I haven't tried other brands, I am a newbie, but I can tell you 100% sure that there **was** a waxy deposit at the bottom of my bottle after it had remained untouched for a few days. And yes, my flakes had been very totally dissolved. This being said, that wax was easily removed: after having left the disolved solution sit for a few days, I just pumped to top portion out, going as close as I dared to the waxy deposit (I used a big 300ml serynge found on Amazon) The whole process made me loose about 100ml of solution, 'cause I chose to remain on the safe side and I wanted to make sure I would not pump any wax. Now, considering that this product is still about half the price of the other popular "high quality dewaxed shellac" available (sold at LV), loosing about 10% was totally fine with me. It is still an absolute good deal, price wise. Adding the alcool to the proper flake amount had given me about 1100ml of 1-pound cut shellac. Once the wax-free portion had been pumped out, I still had about 1000ml of shellac, wich fit perfectly into a standard 32onces Nalgene bottle (these bottles are popular among the outdoor folks; it's made of totally non-reactive plastic, it's unbreakable and perfectly airtight) So, all this to say that I will certainly buy this product again, but people should know this is ***not*** (at least "not completely") dewaxed shellac. You can see on the picture the wax deposit that was at the bottom of the Nalgene bottle before and after my easy "wax removal procedure". The only negative part is that if you do need your shellac to be dewaxed, you can't get it right away. It takes a few days for the wax to deposit itself at the bottom of you bottle.

Dewaxed Platina Shellac Flakes

excellent produit SAUF QUE...

Philippe Gratton · Feb 22, 2022

Cette gomme-laque n'est pas (ou "pas complêtement") décirée. J'ai fait une dissolution "1-pound cut", mes flocons de gomme-laque étaient bel et bien parfaitement dissouts. Après avoir reposé quelques jours, il y avait un dépot cireux bien visible au fond de la bouteille. Bon, cette cire fut très facile à retirer; je n'ai eu qu'à pomper la solution à l'aide d'une grosse seringue de 300ml (trouvée sur Amazon). En fin de compte, le processus m'a fait perdre environ 100ml de gomme-laque, soit environ 10% de ma quantité totale obtenue originalement... J'aurais probablement pu en perdre moins mais j'ai choisi de rester du côté sécur, ne voulant pas risquer de pomper de la cire. En fin de compte, considérant que ce produit est vendu chez Ardec plus ou moins la moitié du prix l'autre option disponible (la gomme-laque décirée vendue chez LV), je considère que cette gomme-laque demeure une très très bonne affaire et je vais certainement en acheter de nouveau. Par contre, quiconque a vraiment besoin d'une gomme-laque décirée (comme moi, pour utilisation sous une peinture de lait), il est important de savoir que cette gomme-laque ne sera pas utilisable immédiatement après dissolution des flocons. Quelques jours sont nécessaires à la cire pour se déposer. Voici des photos du dépot cireux en question, avant et après que je ne retire la gomme-laque avec ma grosse seringue ;) La bouteille a une teinte "charcoal", c'est que j'utilise des bouteilles de type "Nalgene", bien connues des amateurs de plein-air. Elles sont faites d'un plastique 100% non-réactif, elles sont incassables et elles sont 100% étanches.

          

Terms of Sales · Privacy · Cookies · En français