I plan on finishing a maple guitar kit using the following Mohawk Products as well as some water based stain.

1- coat of black stain , sanded back to highlight grain
2- apply 2 coats Colour Tone Red
3- Finish with 9 coats ( 3 per day ) scuff sand each day of instrament lacquer gloss and then finish sand and buff.

Do I need to put 2-3 coats of vinyl sealer over the colour before applying clear lacquer and then level sand ? and if not required how long after appling colour should I start appling clear ?

Regards

Hi,

Sorry for delay ins responding!

Yes the E-Z Vinyl Sealer can be applied before the Toner and at the end. Two hours after having applied the Toner.

Kind Regards,

No problem. So to clarifyu apply E-Z Vinyl Sealer after the stain and then again after the toner before the clear coats are applied and they can be applied anytime after the E-Z Viynl Sealer has dried and been sanded level.

Regards

Yes!

Thanks again

Rrgards

[Deleted by a moderator]