The forum is archived and is no longer active. It is no longer possible to post new topics or reply to messages. Please contact us if you have any questions.
I use General Finishes High Performance poly as topcoat and have been looking into doing a final polish.
General Finishes is very specific to not use water as a lubricant when sanding their water based finishes.
Polishing is pretty much similar to sanding and many polishes, including the Mirka Polarshine are water based. So is concerning.
Do you know if the Mirka Polarshine are safe on water based poly ?
If I sand to 1500 grit, would a polish with Polarshine 12, followed by a polish with Polarshine 8 seem like a reasonable process ?