Natural Oil Woodstain Effect by Osmo

New Product

from $3.00
Free Delivery
Quebec, Ontario · More info

Osmo Natural Oil Woodstain Effect is a decorative, satin wood protective finish with metallic effects based on natural oils for any wood in the exterior.

Microporous surface allows the wood to breathe and reduces swelling and shrinkage. Natural Oil Woodstain Effect is water-repellent and extremely weather-resistant. It is UV-stable surface does not crack, peel, flake or blister.

Natural Oil Woodstain Effect does not require any primer, nor any sanding when recoating. It's easy and seamless to apply. This product contains active ingredients to protect against mould, algae and fungal attack and has proven itself over decades, and also under extreme climatic conditions.

Osmo Natural Oil Woodstain Effect is ideal for use on any exterior wood, including doors, windows and shutters, carports, timber cladding, balconies, smooth fences, pergolas, garden furniture and summer houses.

  • An all-in-one, premium oil-based wood stain for any exterior wood
  • Twice as much coverage through high oil content - saves time and money
  • Excellent durability all year round
  • Weather resistant and water-repellent
  • Active ingredients protect against mould, algae and fungal attack
  • UV-stable to help reduce the greying effects of the sun
  • Provides a semi-transparent, decorative, metallic satin finish
  • Based on a blend of natural oils
  • Benzene-free formulation, Low VOC content

5 ml Samples

Flat shipping rate of $3.95 per order, shipped with Canada Post Lettermail.

Horizontal Surfaces

Osmo Natural Oil Woodstain Effect is not recommended for horizontal surfaces. Osmo recommends their Decking-Oil.

Colors shown are for information purposes only: Actual colors may vary from the color on your screen due to monitor differences.

Directions for use

Surface Preparation

  • Wood surface must be clean, dry and frost-free (moisture content max. 20%).
  • Osmo Natural Oil Woodstain Effect is ready to use, please do not thin.
  • Stir well before use. Clean old microporous stains thoroughly. Old paints and lacquers must
    be completely removed. As a general rule, wear a dust mask during sanding works. If possible, please apply the first coat to all sides before installation.
  • The finished surface is, among other things, influenced by the wood’s natural characteristics. Therefore, a trial application is always required, especially for unfamiliar surfaces.
  • If additional protection against blue stain, rot and insects is desired, pre-treat the wood if possible on all sides with Osmo WR Base Coat.

Application

  • With Osmo Flat Brush or Osmo Microfibre Roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well.
  • Allow to dry for approx. 4-6 hours with good ventilation.
  • After drying, apply a second coat also thinly and quickly.
  • When renovating, one coat applied to the clean and dry surface is usually sufficient.

Drying Time

Approx. 12 hours (normal climatic conditions, 23 °C/ 50 % rel. humidity). Lower temperatures and/or higher air humidity can increase the drying time. Allow for good ventilation while drying.

NOTE

  • Dried surface is satin-glossy at first and is afterwards satin. Light-coloured transparent finishes offer only limited UV protection and are therefore not recommended for surfaces exposed to strong sunlight.

  • The transparent colour tone is influenced by the natural tone of the wood and may deviate from the colour chart.

  • To extend the life of the finish, it is recommended to apply 1 final top coat of Osmo UV Protection Oil Extra 420 Clear after thoroughly drying.

  • Many wood species contain water-soluble coloured extractives which may leach out naturally when weathered.

  • Osmo Natural Oil Woodstain Effect contains biocides and is therefore only to be used on exterior areas. The added active ingredients delay or minimize the risk of algae and fungal attack.

  • For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided.

Variants

5 ml (Sample) · Agate Silver - 1140
121 00 216
$3.00 In stock
5 ml (Sample) · Graphite Silver - 1142
121 00 218
$3.00 In stock
5 ml (Sample) · Onyx Silver - 1143
121 00 219
$3.00 Out of stock
750 ml · Agate Silver - 1140
121 00 230
$118.00 In stock
750 ml · Graphite Silver - 1142
121 00 242
$118.00 In stock
750 ml · Onyx Silver - 1143
121 00 248
$118.00 In stock
2.5 L · Agate Silver - 1140
121 00 231
$359.00 In stock
2.5 L · Graphite Silver - 1142
121 00 243
$359.00 In stock
2.5 L · Onyx Silver - 1143
121 00 249
$359.00 In stock

Specifications

Classification Oils & Oil Finishes for Wood
Wood Stains and Dyes
Brand Osmo
Sizes
  • 5 ml (Sample)
  • 750 ml
  • 2.5 L
Sold Since March 30, 2022
Composition

Based on natural plant oils (sunflower oil, soya oil, thistle oil and linseed oil), iron oxide and organic pigments, titanium dioxide white pigment, effect pigments, siccatives (drying agents) and additives. Biocidal active ingredient: Propiconazole. Dearomatized white spirit (benzene-free).
Complies with Environment Canada VOC regulations (SOR/2009-264). Detailed declaration of ingredients available upon request.

Coverage

1 litre covers approx. 280 ft2 (26 m²) with one coat. Coverage will vary depending on the type, age and texture of the wood.

Origin

Germany

Odor

Faint/mild, after drying odourless

Storage

Up to 5 years and longer if can is kept dry and closed tightly. If thickened by frost, store for 24-36 hours at room temperature before use.

Dispose of leftover product and packaging in accordance with Local or Provincial recycling regulations.

Tools cleaning

With Osmo Brush Cleaner (free of aromatic compounds).

Viscosity

43-60s DIN EN ISO 2431/4 mm, viscid

Recommended Surfaces

Osmo Natural Oil Woodstain is ideal for any exterior wood: doors, windows and window shutters (dimensionally stable elements), carports, timber cladding, balconies, fences, pergolas, garden furniture and summer houses (dimensionally unstable elements).

Number of Coats

For effective protection, two coats are to be carried out. In accordance with the latest technical research, permanent protection against algae and fungal attack cannot be provided.

Similar Products

Complementary Products

Review

There is currently no review for this product. Be the first to submit one!

          

Terms of Sales · Privacy · En français