Preparation : All surfaces must be clean and free from dust, dirt, wax, grease, oil and mold. Complete all staining before applying finish coats. Remove all dust from the surface to be coated. Moisture content of wood must be 12% or below.
Always test for penetration, appearance and color in an inconspicuous area before applying. Protect, cover or mask all areas and surfaces that do not require coating.
Not recommended to be applied in direct sunlight.
Stir containers of Broda Pro-Thane well. Do not shake.
Broda Pro-Thane must be applied to dry surfaces.
Do not apply below 10 °C or over 25 °C.
Application : Apply uniformly using a synthetic bristle brush, a sprayer or a micro-fiber applicator on all the surfaces. Spread any spills and puddles.
Sand lightly between coats to remove raised grain. Remove all dust before recoating. UV exposure during drying is needed to initiate curing.
Application tools :
- Synthetic bristle brush
- Micro-fiber applicator
- Spray gun : HVLP Pressure: 2000 psi Tip: 011 - 015 standard needle.
- Do not use a roller
Number of coats : 2 to 3 coats
Drying time :
To the touch : 15 minutes
Can be sanded (wood only) : 30 minutes
Between coats : 1 hour
Protect from water and freezing for 24 hours.
Fully cured : 30 days
CONTENTS MAY BE HARMFUL. Do not swallow. Do not get in eyes or on skin. Keep out of reach of children. Vapor and spray mist harmful. FIRST AID TREATMENT: If in eyes, rinse with water for 15 minutes. If on skin, rinse well with water. If swallowed, call a
Poison Control Centre or doctor immediately. Do not induce vomiting. Have the victim drink 2 glasses of water. If inhaled, remove person into fresh air.
