- Apply a thick coat of 3 mm (equivalent to the thickness of 2 Toonies) or more of Super Remover on the surface to strip. Wait at least 15 to 30 minutes. Wait a little longer if there’s a lot of coats to strip. Do not rush this step.
- With a spatula, remove the residues.
- When most of the job is done, reapply a thin coat of Super Remover and clean with a steel wool or an abrasive pad, making sure that you are scrubbing while following the wood grain.
- Clean with a damp cloth and use mineral spirits if necessary.
- Wipe dry with a clean cloth.
CONTENT MAY BE HARMFUL. MAY IRRITATE EYES. DANGEROUS FUMES FORM WHEN MIXED WITH OTHER PRODUCTS. Do not mix with other household chemicals. Do not swallow. Do not get in eyes. Do not breathe fumes. Keep out of reach of children. Use only in a well-ventilated area. Wear a mask. Keep away from flames or sparks.
FIRST AID TREATMENT: Contains Dimethylformamide and Hydroxypropyl methycellulose. If swallowed, call a Poison Control Centre or a doctor immediately. If person is alert, do not induce vomiting. If in eyes, rinse with water for at least 20 minutes. If breathed in, move person to fresh air.