The 3 ¾ x 4 ¾ x ½" sanding sponge is made of aluminium oxide on a foam sponge. This sponge is usable on both sides and allows it to take on the exact shape of the wood.
Siasponge flex sanding sponge can be used for the sanding of hard, soft or veneering woods and also for the sanding of paint and varnish.
Be it curves, shapes or contours – an even and perfect sanding pattern can be achieved with 7983 siasponge flex. The extra-soft foam of siasponge flex ensures maximum conformability.
3 ¾ x 4 ¾ x ½" (98 mm x 120 mm x 13 mm)
Hardwood, Softwood, Old paint, Old lacquer, Colour, Primer filler, PU lacquer, Polyester lacquer, UV lacquer, Water-based Varnish, Melamine sheet, NC lacquer, Bodyfiller, Plastics, Solid surface material, Plaster.
· Aug 13, 2022
· Jun 14, 2022
I make solid-body, electric guitars, and I have looked long and hard to find a really good product for dry sanding on clear coat finishes. I often want to level sand in between coats to minimize wet sanding at the end and prior to buffing. This product works great and ensures you don't run the risk of stripping away the clear in spots, especially where there are small round-overs. This is now my go-to for this stage in finishing.
· May 4, 2021
We refinish Kitchen Cabinets. We do a lot of hand sanding because of all the profiles and edges. We have been experimenting with a variety of different abrasives. This one comes out on top for our purposes. It’s comfortable to hold and conforms to any profile. The edges don’t on the paper and it allows us to sweep into crevices and tight spots with a perfect edge on the paper. Having abrasive on both sides is perfect for keeping a grip on the paper. We can sand flat spots with an open palm and little pressure and the paper stays in place. It also bounces back to same shape and rarely tears. This is perfect for our hand sanding.
Thanks Sia, and Ardec. Great product.
Spray it NewPeterborough Ontario
1 review in French for this product.
Be the first to know about our new products and sales.
Terms of Sales