DIRECTIONS FOR USE / APPLICATION NOTES

Please read all directions before using. Always test a small area before full use.

1. For best results, prepare surface to be filled with GoodFilla CLEAR by applying a shellac or preferred primer as a 'wash' or 'sealer' coat to wood surface. (GoodFilla CLEAR may also be applied directly to the wood.)
2. Sand surface to be finished with 180 grit (or finer) sandpaper. Remove dust.
3. Apply liberal amount of GoodFilla CLEAR Grain-Filler by spraying, brushing, or wiping it on the surface, filling all pores.
4. Let dry for fifteen minutes or until GoodFilla CLEAR Grain-Filler turns white and powders easily. Sand excess filler lightly with 220 grit sandpaper. You may also remove excess filler with damp cloth.
5. Remove dust with dry microfiber cloth.
6. Apply finish. (for best results with water-based finishes, apply heavily)
7. GoodFilla CLEAR Grain-Filler will turn clear after the finish is applied.
8. If desired surface is not achieved, repeat process as needed. GoodFilla CLEAR can be applied between finishes without
   affecting adhesion.
9. CLEAR Grain-Filler accepts any stain or finish when dry. (Always test small area first.)

NOTE:

• To enhance the grain or to tone the finish, GoodFIlla CLEAR Grain-Filler can be tinted with all universal tints, water-soluble dyes, stain and wood flour.
• For deep pores and cracks, mix GoodFilla CLEAR with GoodFilla water-based paste wood filler. (we cannot guarantee results if mixed with any other paste filler).

DIRECTIONS FOR USE/STAIN APPLICATION

1. Mix water-based pigment or dye into GoodFilla CLEAR until desired color is achieved.
2. Sand surface to be finished with 180 grit (or finer) sandpaper. Remove dust.
3. Apply liberal amount of pigmented GoodFilla CLEAR Grain-Filler by spraying, brushing, or wiping it on the surface, filling all pore. Keep applying layers of pigmented GoodFilla CLEAR until desired color is achieved.
4. Let dry for fifteen minutes or until pigmented GoodFilla CLEAR Grain Filler turns opaque.
5. Remove dust with dry microfiber cloth.
6. Apply finish.
7. If desired color is not achieved, repeat process as needed.
8. The pigmented GoodFilla CLEAR Grain-Filler accepts any finish when dry. (Always test small area first.)
9. Apply between finish if desired.