Mixing Instructions
In a clean, dry container combine (by volume) 2 parts resin with 1 part hardener, and mix thoroughly for 4-5 minutes. Add color or metallic pigments as desired and mix until evenly dispersed.
Application instructions
Working area should be clean, dry and free of dust. FlowCast SPR can be poured at 6-25mm (1/4" to 1") per layer. However, it may slowly fill cracks and voids in live edge wood pieces, causing the resin level to drop. Be prepared to add more epoxy as multiple thinner pours may be necessary to prevent overheating. Fans blowing across the curing epoxy may also be used to help dissipate heat. For best adhesion between layers, wait until the first layer is fully set to touch. Sand with 220 grit sandpaper and wipe down before pouring another layer. See FlowCast SPR Application Guide for more details.
Clean up
Isopropyl/denatured alcohol or warm soapy water