Pro Finish Aerosol Lacquer System - 400 Series by DFP

Achieve professional-quality results with DFP Pro Finish 400 Series aerosol lacquers. The pre-catalyzed formula provides higher solids content, enhanced durability, and superior resistance to yellowing compared to traditional nitrocellulose-based finishes. This system ensures excellent compatibility when applied over existing finishes.

All DFP aerosols come equipped with fan tip sprayers. This allows for smooth application of toners and finishes reducing overspray and uneven finishing.

Provides crystal-clear finishes with minimal yellowing and excellent build
Delivers smooth, even application with superior flow and strong adhesion
Combines the appearance of nitrocellulose with the advantages of pre-catalyzed technology

Documents

Technical Data Sheet Safety Data Sheet Safety Data Sheet (Primers and Sealers) The importance of clearing aerosol products

Directions for Use

Clean surface of contaminants using silicone-free solvents such as a cleaning thinner or the DFP Wax-Off.
Keep air and surface temperature between 15-25°C.
SHAKE WELL BEFORE USING. If you don’t hear the mixing ball when shaking, GENTLY tap the base of the can on a hard surface to loosen it.
Point spray nozzle at target surface and spray side-to-side moving outwards from
about 30-40cm.
Work in thin coats to avoid sagging or cracking and wait for each coat to dry before re-coating.
Invert can and spray until only propellant comes out to clear the nozzle and
tube.
See SDS for health and safety measures.

Variants

Pro Finish - Black Primer (451)	$18.89	In stock
Pro Finish - Clear Dead Flat (403)	$18.89	In stock
Pro Finish - Clear Flat (402)	$18.89	In stock
Pro Finish - Clear Gloss (400)	$18.89	In stock
Pro Finish - Clear High Gloss (450)	$18.89	In stock
Pro Finish - Clear Satin (404)	$18.89	In stock
Pro Finish - Clear Semi-Gloss (401)	$18.89	In stock
Pro Finish - Flat Sanding Sealer	$18.89	In stock
Pro Finish - Heavy Body Flat (412)	$18.89	In stock
Pro Finish - Heavy Body Gloss (410)	$18.89	In stock
Pro Finish - Heavy Body Sanding Sealer (500)	$18.89	In stock
Pro Finish - Heavy Body Semi-Gloss (411)	$18.89	In stock
Pro Finish - Premium Gloss (490)	$18.89	In stock
Pro Finish - Sanding Sealer (460)	$18.89	In stock
Pro Finish - Vinyl Sanding Sealer (470)	$18.89	In stock

Specifications

Classification	Wood Lacquers
Brand	DFP - Dover Finishing Products
Sold Since	December 3, 2024
Drying Time	Average dry time: 15-20 minutes Average time to recoat: 30-40 minutes
VOCs	Less than 550 g/L
Origin	Canada
Shelf Life	2 years
Solids	21% by volume