Preparation : Stir the product well before and during the application. Do not shake. Not recommended to be applied in direct sunlight.
Deep clean all porous surfaces using a hard brush. All surfaces must be free from dust, dirt, wax, grease, oil and mold. Sand smooth wood surfaces using 60 to 80 grit sandpaper to remove mill glaze or existing finish.
Always test for penetration, appearance and color in an inconspicuous area before applying. Protect, cover or mask all areas and surfaces that do not require coating.
Broda Clarity WS can be applied to dry or damp surfaces.
Pour contents into an empty container. Loosen pigment from the bottom or original container and pour the contents back in, repeat until all pigments is in solution. Intermix all containers of the same color.
Application : Apply using a synthetic bristle brush or a sprayer an even coat on all the surface. Spreads any spills and puddles.
On wood, slightly sand between coats. Repeat the operation for the next coats.
If necessary, dilute the clarity with up to 10% of water to facilitate the application.
Application tools :
- Synthetic bristle brush
- Micro-fiber applicator
- Spray gun : HVLP Pressure: 2000 psi Tip: standard needle 011 - 015
- Do not use a roller
Number of coats : 2 or 3 coats depending on the protection and sheen required.
Drying time :
To the touch : 30 minutes
Can be sanded (wood only) : 1 hour
Between coats : 4 to 6 hours.
Protect from water and freezing for 48 hours.
