Clarity WS by Broda

In stock
from $79.95
Free shipping
on orders over $90
Quebec, Ontario · More info

Broda Clarity Wood & Stone is a waterborne cross linking acrylic indoor and outdoor finish composed of very fine pure acrylic particles for wood, concrete and stone.

Broda Clarity WS is a flexible limpid vapor permeable finish. Clarity WS produce a non-ambering satin finish, resistant to U.V. and molds.

Clarity WS is very low in VOC, low odor, not flammable and has a good open time. Clarity WS can be applied over a wide range of temperatures and humidity.

Directions of use

Preparation : Stir the product well before and during the application. Do not shake. Not recommended to be applied in direct sunlight.

Deep clean all porous surfaces using a hard brush. All surfaces must be free from dust, dirt, wax, grease, oil and mold. Sand smooth wood surfaces using 60 to 80 grit sandpaper to remove mill glaze or existing finish.

Always test for penetration, appearance and color in an inconspicuous area before applying. Protect, cover or mask all areas and surfaces that do not require coating.

Broda Clarity WS can be applied to dry or damp surfaces.

Pour contents into an empty container. Loosen pigment from the bottom or original container and pour the contents back in, repeat until all pigments is in solution. Intermix all containers of the same color.

Application : Apply using a synthetic bristle brush or a sprayer an even coat on all the surface. Spreads any spills and puddles.

On wood, slightly sand between coats. Repeat the operation for the next coats.

If necessary, dilute the clarity with up to 10% of water to facilitate the application.

Application tools :
- Synthetic bristle brush
- Micro-fiber applicator
- Spray gun : HVLP Pressure: 2000 psi Tip: standard needle 011 - 015
- Do not use a roller

Number of coats : 2 or 3 coats depending on the protection and sheen required.

Drying time :
To the touch : 30 minutes
Can be sanded (wood only) : 1 hour
Between coats : 4 to 6 hours.
Protect from water and freezing for 48 hours.


3.78 L $79.95 In stock
18,9 L $339.95 In stock


Category Varnishes
Brand Broda
  • 3.78 L
  • 18,9 L
Sold Since May 21, 2013

200 - 400 sq ft / Gallon, depending on type, age and porosity of surface.


< 90 g / L






Slight ammonia odor


Milky liquid


Keep in an hermetic container at room temperature. Protect from freezing. Do not use the product if it has frozen.

Tools cleaning

Soapy water


Compatible with most water base stains and Broda Pro-Tek-Tor SLT and DR.




When the surface begins to lose its lustre, clean the surface well to remove any contamination. Lightly sand and recoat with Broda Clarity WS.

Similar products

Complementary products


There is currently no review for this product. Be the first to submit one!


Terms of Sales · Privacy · En français