Preparation: The surface must be clean, dry and free of wax, grease, dust or dirt. Mix the varnish with a stick. Do not mix by shaking the container.
Application: Varnish and room temperature should be between 15 and 25°C during application. Relative humidity should be between 30% and 60%. The varnish can be applied with a brush, roller or paint gun. In order to obtain a better result and maximal protection, it is suggested to apply two coats of SamaN Dead Flat Varnish.
Drying time:
- Dry to the touch: Approximately 30 minutes
- Re-Coat : Approximately 2 hours
