- Apply a thick coat of 3 mm (equivalent to the thickness of 2 Toonies) or more of Super Remover on the surface to strip. Wait at least 15 to 30 minutes. Wait a little longer if there’s a lot of coats to strip. Do not rush this step.
- With a spatula, remove the residues.
- When most of the job is done, reapply a thin coat of Super Remover and clean with a steel wool or an abrasive pad, making sure that you are scrubbing while following the wood grain.
- Clean with a damp cloth and use mineral spirits if necessary.
- Wipe dry with a clean cloth.
CONTENTS HARMFUL. MAY IRRITATE EYES. MAY IRRITATE SKIN. Do not swallow. May cause blindness if swallowed. Do not get in eyes or on skin or clothing. Do not breathe fumes. Keep out of reach of children. Wear a mask, impervious gloves and safety glasses. Use only in a well-ventilated area. Keep away from flames or sparks. TO OPEN: Press down while turning. Close tightly after each use and store in cool place. PRECAUTIONS: Always open carefully to avoid splash.
FIRST AID TREATMENT: Contains Methylene chloride, Methanol, Toluene and Solvent naphta petroleum, medium aliphatic C9-C12. If swallowed, call a Poison Control Center or a doctor immediately. Do not induce vomiting. If in eyes, rinse with water for at least 20 minutes. If on skin, rinse well with water. If on clothes, remove clothes. If inhaled in, move person to fresh air.