T70™ HVLP Turbine Spray Gun offers an enhanced spray pattern for exceptional performance. Its sleek, 20% lighter design is ergonomic and well balanced, allowing for easy maneuvering and less fatigue on the operator.
All Fuji T-Series Spray Guns are Non-Bleed, so the air can only pass through the spray gun when the trigger is activated. This results in less blowing around of dust in the spray area, less paint buildup on the tip of the fluid nozzle, and the spray gun noise is lessened, since the hiss is intermittent. The T-Series spray gun is extremely easy to clean.
The T70™ Spray Gun features a Stay-Cool Nylon Handle, Stainless Steel Fluid Passages and an External Needle Packing Adjustment. The Fan Pattern is adjustable from 1” to 15” from 8" distance.
Extra T70™ Aircap Sets also available. (0.8 mm - 1.0 mm - 1.3 mm - 1.5 mm - 1.8 mm - 2.0 mm - 2.5 mm)
This spray gun can only be used with an HVLP Turbine (any make). It cannot be used with standard compressors.
As of September 2019 all bottom feed Fuji Spray Guns come assembled with the 2095 cup assembly. Prior to September 2019 the bottom feed spray guns were assembled with the 2042 cup assembly.
This control allows the operator to switch from a circular to oval pattern and anywhere in between.
Unlike traditional HVLP turbine spray guns with the front collar adjustment, the Side-Mounted Fan Pattern Control™ offers full incremental fan size throughout the whole range. Located on the left side of the spray gun for convenience, it is easy to adjust: turn counter-clockwise for a smaller pattern and clockwise for larger.
Canada
2 years – Parts & Labor
Jordan Loshinsky · Jan 21, 2021 · Edit · Delete
Second gun we have purchased to help increase our production. Love the system.
Soyez les premiers informés de nos nouveautés et promotions.
Terms of Sales · Privacy · Cookies · En français
